Engineering plastic with outstanding strength, stiffness, and electrical insulating properties
Noryl® modified PPO is an engineering thermoplastic with high dielectric strength, a low coefficient of thermal expansion, and low moisture absorption which make it an excellent choice for electrical applications that require machining to tight tolerances. FDA compliant grades of Noryl® available. For Noryl® chemical resistance view our chart.
Shop for Noryl®
12 in x 12 in – 24 in x 48 in
0.040 in – 3 in
0.187 in – 6 in
Length, width, thickness, and diameter tolerances vary by size, by manufacturer, brand, and grade. Custom sizes available upon request.
Noryl® Properties and Material Options
Noryl® EN265 Sheet– Can be machined, fabricated, painted and glued.
Tech Tip– Noryl® can often be used as a lower cost alternative to Ultem® for electrical applications where the high temperature capability and high dielectric strength of Ultem® are not required.
Typical properties of NORYL®
|Izod impact (notched)
||ft-lbs/in of notch
|Heat deflection temperature @ 264 psi
|Maximum continuous service temperature in air
|Water absorption (immersion 24 hours)
|Coefficient of linear thermal expansion
Values may vary according to brand name. Please ask your Curbell Plastics representative for more specific information about an individual brand.
Explore the physical, mechanical, thermal, electrical, and optical properties of Noryl®.
Sort, compare, and find the plastic material suited for your application using our interactive properties table.