OP-TEK® Frame Release Tape

Pressure sensitive adhesive tape for quick release of plastic during pulling

About OP-TEK® Frame Release Tape

OP-TEK® Frame Release Tape is an easy to apply high temperature release tape that prevents flexible inner liner materials from sticking to frames used for bubble/blister forming during fabrication. Available in 2” and 4” roll widths.

Directions for Applying Tape to Frames:

  1. Make sure frame faces are clean and free of debris (use alcohol wipe as needed).
  2. Cut lengths of tape for application.
  3. Remove release liner and place end of the tape strip on frame.
  4. Slowly start to press tape strip onto frame face working horizontally.
  5. Work slowly to prevent any air bubbles from getting under tape during application.
  6. Trim excess lengths of the tape and frame opening with scissors or razor knife.



We're Here to Help

Can’t find what you need? Have a technical question?

Continue Your Research

stacked sheets, rods, and tubes of acetal in various colors

Research Materials

We carry an extensive inventory of plastic sheets, rods, tubes, film, tapes, adhesives and more from highly qualified manufacturers.

Engineer technician designing drawings of mechanical parts

Specialized Services

We provide value for our customers with inventory programs, troubleshooting, traceability, process efficiencies, and more.

Acrylic sheet carving machine with a Flatbed cnc machine

Fabrication & Machined Parts

Curbell supplies fabricated and machined plastic parts manufactured via CNC routing, milling, vacuum forming, die cutting, and more.

Smiling woman
Have a Question?
Curbell Plastics, Inc. Unauthorized use is strictly prohibited. All other trademarks, service marks and logos used herein are property of their respective owners. All rights hereto are retained by Curbell Plastics and any third party owners of such rights. All statements, technical information and recommendations contained in this publication are for informational purposes only. Curbell Plastics, Inc. does not guarantee the accuracy or completeness of any information contained herein and it is the customer's responsibility to conduct its own research and make its own determination regarding the suitability of specific products for any given application.

©2024 Curbell Plastics, Inc. All rights reserved.

California Transparency in Supply Chains Act | Terms & Conditions | Privacy Policy