Thermal Spray Tapes (plasma spray and flame spray tapes)

Home » Products » Specialty Materials » Tapes, Fabrics, and Belts » Thermal Spray Tapes
Overview
 Performance Characteristics
 Typical Applications
 Typical Properties
Click to view
Thermal spray tapes
DOWNLOAD

Also, visit our technical resources section		 Overview Plasma spray and flame spray thermal tapes are all created to withstand high temperature and the most demanding plasma spray, flame spray, and grit blasting applications. These thermal spray tapes are known to resist fray and will release easily without leaving adhesive residue.

Thermal spray tapes are an excellent choice for combining conformability with thermal and abrasion resistance while protecting adjacent surfaces from spray.

Standard Packaging

THICKNESSES 7 - 10 mil
LENGTHS 36 yds
WIDTHS Slit to required size
  • Length, width, and thickness tolerances may vary by manufacturer
  • Certain grades are available in various colors
  • Minimums may apply to certain materials

Grades

  • 2975-8R Glass - Silicone, Thermal Spray Tape
    Silicone rubber/glass cloth backing coated with an aggressive high temperature silicone adhesive.
  • 2915 Glass - Cloth, Thermal Spray Tape
    Manufactured from a high temperature glass cloth tape with a durable woven fiberglass backing coated with a high temperature silicone adhesive.
  • 2925 Glass - Foil, Thermal Spray Tape
    Manufactured from a thin aluminum foil laminated to a high temperature glass tape with high temperature silicone pressure sensitive adhesive (PSA) on one side.
  • 2905 Glass - Cloth, Thermal Spray Tape
    Manufactured from a high grade heat resistant glass cloth backing coated with a high performance silicone adhesive on both sides.

NOTE: Several other grades of thermal spray tapes are available. For additional information on plasma spray and flame spray tapes, contact your local Curbell Plastics representative or call Curbell at 1-888-287-2355.
Click to view
Thermal spray tapes
DOWNLOAD

Also, visit our technical resources section 		Performance Characteristics
  • Excellent strength and flexibility
  • Minimal wrinkling
  • Able to withstand abrasion and grit blasting
  • Maximum solvent resistance
  • Easy wrapping of complex shapes
Click to view
Thermal spray tapes
DOWNLOAD

Also, visit our technical resources section		 Typical Applications
  • Protective wrapping for wire and cables
  • Jet engine manufacturers, overhaul centers, air force bases, etc. (plasma spray masking tape)
  • Over-wrap on motor rewinds
  • Inner wrap for coils and transformers
Typical Properties

2975-8R Glass - Silicone, Thermal Spray Tape

PROPERTY UNITS 2975-8R
Backing material Glass-silicone
Adhesive type Silicone
Total thickness inches 0.0105
Backing thickness inches 0.0070
Adhesive thickness inches 0.0035
Adhesion to steel oz/inch 50
Elongation % at break 5
Operating temperature °F -100°-500°
Break strength lbs/in 150
Dielectric strength volts 7,000
Color White
* Values shown are typical

2915 Glass - Cloth, Thermal Spray Tape

PROPERTY UNITS 2915-7 2915-10
Backing material Glass-silicone Glass-silicone
Adhesive type Silicone Silicone
Total thickness inches 0.0070 0.0100
Backing thickness inches 0.0045 0.0055
Adhesive thickness inches 0.0025 0.0045
Adhesion to steel oz/inch 40 40
Elongation % at break N/A N/A
Operating temperature °F -100°-500° -100°-500°
Break strength lbs/in 160 175
Dielectric strength volts 4,500 5,000
Color White White
* Values shown are typical

2925 Glass - Foil, Thermal Spray Tape

PROPERTY UNITS 2925-7 2925-11
Backing material Glass-silicone Glass-silicone
Adhesive type Silicone Silicone
Total thickness inches 0.0070 0.0110
Backing thickness inches 0.0025 0.0075
Adhesive thickness inches 0.0045 0.0035
Adhesion to steel oz/inch 60 75
Elongation % at break 7 7
Operating temperature °F -100°-500° -100°-500°
Break strength lbs/in 130 200
Dielectric strength volts N/A N/A
Color Silver Silver
* Values shown are typical

2905 Glass - Cloth, Thermal Spray Tape

PROPERTY UNITS 2905-7R 2905-10R
Backing material Glass-cloth Glass-cloth
Adhesive type Silicone Silicone
Total thickness inches 0.0070 0.0105
Backing thickness inches 0.0045 0.0065
Adhesive thickness inches 0.0025 0.0040
Adhesion to steel oz/inch 40 25
Elongation % at break 10 10
Operating temperature °F -100°-500° -100°-500°
Break strength lbs/in 175 225
Dielectric strength volts N/A 8,000
Color White White
* Values shown are typical
Products
Markets

Request a tapes sample swatch booklet - PTFE Tapes and Fabrics, Plasma Spray Tapes, Polyimide Tapes, or UHMW Tapes

NEED MORE INFORMATION?
Contact Curbell Plastics at 1-888-287-2355 for more specific information about thermal spray tapes or complete our request for quote online form.